| |
|
PIN
and PDD
Call for PINs
|
PDDs developed under the NSS |
In consultation with the Technical Advisory Group, the study team
shortlisted following projects for PDD development.
Palachan Small Hydro Power Project,
Himachal Pradesh, India 
Conversion
of Municipal Solid Waste (500 TPD) into RDF pellets
(Refuse Derived Fuel) at
Okhla, New Delhi, India
Energy
efficiency improvement in small-scale foundry units at
Rajkot cluster, Gujarat,
India
Municipal
Street Lighting Energy Efficiency Project,
Bangalore Development Auhority
(BDA), Bangalore, India
Rural
Electrification by Decentralised Distribution Generation
systems through mix of renewable
technologies in Orissa, India
|
During the launch
of the National Strategy Study for implementation of CDM in India, a call
for a project information note (PIN) for developing few project design
documents (PDD) was made with respect to Task 5 of the NSS.
Subsequently the call
for PINs was also made through this web site. Further the stakeholders,
namely the industrial associations, state energy development agencies,
non-governmental organizations, equipment manufacturers, consultants,
project developers, project promoters, technology suppliers, financial
institutions, bilateral and multilateral agencies, etc., were also contacted
by the TERI NSS team inviting PINs.
A snapshot
of PINs received
As a response to this
call for PINs, TERI-NSS received 68 PINs from various sectors, details
of which are as follows:
| Sectorwise
PINs received |
|
| Renewable Energy |
27 |
| Power Sector |
4 |
| Energy Efficiency |
16 |
| Waste-to-Energy |
11 |
| Building Sector |
2 |
| Fuel Switch |
4 |
| Transport |
2 |
| Industrial Waste-to-Use |
1 |
| Agriculture |
1 |
| Number
of PINs received |
68 |
A quick analysis
of these PINs revealed,
The total annual emission reductions from all the projects is estimated
to be nearly 48 million tonnes of carbon dioxide equivalent.
The renewable
energy (RE) sector dominated the PINs received. Most of the sectors in
RE were represented viz., wind, small hydro, biomass power, biomass gasification,
bagasse cogeneration and solar thermal. Of the total of 27 PINs, 15 were
on biomass-based power generation
In the Energy
Efficiency category, industries such as steel, cement, foundry, brick,
glass, petroleum refinery, paper mill, fertilizer, were represented
PINs were
received from all over the country.
The details
provided in the PINs varied widely with respect to CER (Certified Emission
Reductions) volume, project cost, project status etc.,
A few PINs
provided only the project concept.
|
